Our sublimation heat transfers are made with only quality materials.
**If design is shown with a pocket design, please be sure to order separately unless specified it's included. Order the larger design and then "pocket" for the smaller design, otherwise it will not be included in your order.**
Size References *(Sheet size measurements NOT shirt size)*
XL- 13” (recommended size for rugs, signs, etc)
Large - Approx. 11” (preferred size to have a good design cover on all adult shirts. Definitely recommeded for use for XL adult and up)
Medium - Approx. 8.5” (Recommended for Youth Large up to Adult Medium. Not recommend using on shirt larger than Adult Medium.)
Small- Approx. 7” (Recommended for 2T - youth Large shirt sizes)
XS-Approx. 5” (Recommended for infant onesie, baby tees, towels, etc)
Mugs (two of same print for each side)
HOW TO USE Sublimation Heat Transfers:
You must use a HEAT PRESS to use these transfers, as a normal iron does not reach the adequate temp. The shirt which you apply the transfer has to be at least 50% polyester. 100% cotton shirts will not work because there is no poly for the inks to adhere to. Shirts with less than 60 percent polyester will have a faded, vintage look to them. This type of transfer ink dyes the fabric and don’t leave a heavy feel on the of the shirt similar to vinyl. Transfers are more vibrant when you use on white or light-colored shirts and when there is white is on the transfer it will become the color of the shirt. Because the transfer becomes part of the shirt if you are using colored shirts you may see a difference in the color of the print. Black shirts cannot be used for this type of transfer.
All measurements are approximate and will be sized accordingly to the design. If there is a custom size or design that you are in need of, please message us as we will try to accommodate your need. A $25 custom design fee may apply.
Please let us know if you have any questions!